The EBS outperforms all other makes due to the vast surface area of our coils.

For example, our 150 litre tank will provide more hot water in one hour than other manufacturers’ 300 litre models.

Our philosophy is simple, store a smaller amount of hot water but recover it very quickly enabling vast amounts of hot water upon demand.

Compare our coil size with other makes - Larger coil means faster recovery.

Compare our quality and weights with other makes - Ours are heavier than others due to the thickness and grade of material used in construction.

Compare our capacity – Our size is our actual capacity of water held.

• 100 litre tank can provide 944 litres per hour.
• 150 litre tank can provide 1011 litres per hour.
• 200 litre tank can provide 1797 litres per hour.
• 300 litre tank can provide 1987 litres per hour.

EBS Domestic Hot Water Heaters

Our mains fed un-vented tanks eliminate the need for cold water storage, and provide hot water at mains pressure to all outlets. The tanks can also be supplied for vented use.

The high output coils are designed to complement our boilers ensuring rapid recovery times and allowing the boiler to run in the condensing mode while producing hot water. The unit is equipped with a secondary return to allow the installation of a domestic hot water ring main, if required.

Each module and integral coil is constructed from high grade 316L austenitic stainless steel. The prefabricated insulation provides very high standards of efficiency, with a negligible heat loss.